Pages

Tuesday, September 2, 2014

DIY Craft Room Pegboard


This project has been a few years in the making. Back when I first began transforming my little space into a dedicated craft room, I literally slapped a pegboard on the wall and tried hanging stuff from it without any planning or thought put in to it. Nearly two years later, I decided it was time to turn my makeshift solution into a permanent fixture.

Here's what it looked like before...

How did I think that for even a second this was a good idea?!

Lucky for me, my friend, Mike, was willing to help me build it the right way this time. He had the knowledge and the tools to help turn my vision into a reality. I simply sent him a picture of what I wanted and after a quick trip to the hardware store, the job was in his hands!

What you'll need:
4' x 6' pegboard (Warning: this is massive! Make sure you have the wall space and you measure first!)
Crown molding - (2) 4' pieces and (2) 6' pieces
Mitre saw
Wood glue
Paint
Pegboard hooks (I got a variety pack from Lowe's)
Wooden dowels
Scrap wood planks






These pictures are the actual making of the board (the part I had nothing to do with). As long as you have the enough space and the proper tools, it is relatively easy. You simply cut your molding to fit along the edge of the pegboard and glue it directly to it. Using clamps, secure everything in place while the glue dries.

The finished board barely fit in the car to come home and because of that it warped a little. I recommend building everything from start to finish in the same location that it will be in so you don't have to worry about warping. 

Once everything was assembled, I painted it teal to give it a pop of color and then began the hanging process. Now is when you will use the wooden planks I mentioned earlier. These are to set the pegboard away from the wall a bit so it's not flush and you can hang the hooks easily. I did not drill into studs, but instead used anchors and screws to attach the wood scraps to the wall. Once they were secure, it was time to attach the pegboard to the wood. 

So here it is! I won't begin to tell you how long it took me to arrange everything just the way I wanted it. I really couldn't be happier, and I absolutely LOVE that everything is easy to see and find, not to mention I still have a ton of space to hang new things!


Buckets//Michaels Craft Store for $2 a piece
Thread holder//Joann Fabric

This is my favorite part! No more hoops and stabilizer monopolizing all my desk space! I now have a nice place to access them and put them away after each project.


I am so happy I finally got around to upgrading this. It has really helped me keep my nook clean and clutter free since everything has a place and it takes no time to clean up at the end of the day! What do you think? Would this solution work for you?!

6 comments:

  1. We bought a house that had a peg board already in one of the basement bedrooms. Needless to say, choosing that room for my craft room was a no-brainer, and three years later I am STILL loving that peg board. Great project!! I know you'll love having it!

    ReplyDelete
  2. Thank you for sharing this amazing post with us, loved it.
    compare airport parking

    ReplyDelete
  3. I really amazed that you have written such an amazing post. I am a blogger and I keep reading several awesome tutorials. Now a days I am working for hemorrhoids treatment so that people can easily getrid of this disease. I have found amazing product Neo Healar that can easily handle your hemorrhoids.

    ReplyDelete
  4. I am amazed that such post are still up to go. Great .

    Saveucoupon

    ReplyDelete
  5. DIY craft make the life more colorful. I love to make crafting projects with different things. I really enjoy this activity. Gatwick South Terminal Parking

    ReplyDelete